KS0073 datasheet(10/78 Pages) SAMSUNG

No. de pieza	KS0073

Descripción Electrónicos	34COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

Download	78 Pages

Scroll/Zoom	100%

Fabricante Electrónico	SAMSUNG [Samsung semiconductor]

Página de inicio	http://www.samsung.com/Products/Semiconductor

Logo

10 / 78 page

S6A0073

34COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

10

PIN DESCRIPTION (continued)

Pin(No)

I/O

Name

Description

Interface

V5OUT2 (62)

O

Two times

converter output

The value of Vci is converted two times.

To use three times converter, the same

capacitance as that of C1-C2 should be

connected here.

V5 /

capacitance

V5OUT3 (63)

Three times

converter output

The value of Vci is converted three

times.

V5

IM (43)

I

Interface mode

selection

Select Interface mode with the MPU.

When IM = "Low" : serial mode,

When IM = "High" : 4-bit/8-bit bus mode.

-

RS/CS (47)

I

Register select

/Chip select

When bus mode, used as register

selection input. When RS/CS = "High",

Data register is selected. When RS/CS =

"Low", Instruction register is selected.

In serial mode, used as chip selection

input. When RS/CS = "Low", selected.

When RS/CS = "High", not selected.(Low

access enable)

MPU

RW/SID (48)

I

Read, write

/Serial input data

In bus mode, used as read/write

selection input.

When RW/SID = "High", read operation

When RW/SID = "Low", write operation.

In serial mode, used for data input pin.

MPU

E/SCLK (49)

I

Read, write enable

/Serial clock

When bus mode, used as read, write

enable signal.

When serial mode, used as serial clock

input pin.

MPU

DB0/SOD (50)

I/O, O

Data bus 0 bit

/Serial output data

In 8-bit bus mode, used as lowest

bidirectional data bit. During 4-bit bus

mode, Open this pin.

In serial mode, used as serial data output

pin. If not in read operation, open this

pin.

MPU

DB1 - DB3

(51 - 53)

I/O

Data bus 1- 7

In 8-bit bus mode, used as low order

bidirectional data bus.

During 4-bit bus mode or serial mode,

open these pins.

MPU

DB4 - DB7

(54 - 57)

In 8-bit bus mode, used as high order

bidirectional data bus. In case of 4-bit

bus mode, used as both high and low

order.

DB7 used for Busy Flag output.

During serial mode, open these pins.

MPU

Número de pieza similar - KS0073

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
Samsung semiconductor	KS0070	566Kb / 42P	16COM / 80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0070B	566Kb / 42P	16COM / 80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0071B	217Kb / 18P	32COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0072	300Kb / 32P	DOT MATRIX LCD CONTROLLER & DRIVER
	KS0074	537Kb / 70P	34COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD

More results

Descripción similar - KS0073

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
Samsung semiconductor	S6A0071	330Kb / 29P	32COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	S6A0074	701Kb / 68P	34COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0068B	308Kb / 22P	16COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	S6A2068	138Kb / 22P	16COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	S6A0079	338Kb / 36P	34COM/120SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0075	533Kb / 71P	34COM/100SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0071B	217Kb / 18P	32COM/60SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0074	537Kb / 70P	34COM/80SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
	KS0078	563Kb / 71P	34COM/120SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
OKI electronic componet...	ML9041	537Kb / 55P	DOT MATRIX LCD CONTROLLER DRIVER

More results

KS0073 Datasheet(PDF) 10 Page - Samsung semiconductor

KS0073 Datasheet(HTML) 10 Page - Samsung semiconductor

Número de pieza similar - KS0073

Descripción similar - KS0073

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Datasheet Descarga

Enlace URL