7721 datasheet(133/577 Pages) RENESAS

No. de pieza	7721

Descripción Electrónicos	16-BIT SINGLE-CHIP MICROCOMPUTER

PDF	577 Pages

Scroll/Zoom	100%

Fabricante Electrónico	RENESAS [Renesas Technology Corp]

Página de inicio	http://www.renesas.com

Logo

133 / 577 page

TIMER A

7721 Group User’s Manual

8–14

8.3 Timer mode

8.3.3 Operation in timer mode

When the count start bit is set to “1,” the counter starts counting of the count source.

When a counter underflow occurs, the reload register’s contents are reloaded, and counting continues.

The timer Ai interrupt request bit is set to “1” at the underflow in . The interrupt request bit remains

set to “1” until the interrupt request is accepted or the interrupt request bit is cleared to “0” by software.

Figure 8.3.4 shows an example of operation in the timer mode.

Stops counting.

Restarts counting.

FFFF16

000016

Time

Count start bit

Timer Ai interrupt

request bit

n = Reload register’s contents

Cleared to “0” when interrupt request is

accepted or cleared by software.

Set to “1” by software.

Starts counting.

1 / fi ! (n+1)

fi = frequency of count source

(f2, f16, f64, f512)

Cleared to “0” by software.

Set to “1” by software.

Fig. 8.3.4 Example of operation in timer mode (without pulse output and gate functions)

7721 Datasheet(PDF) 133 Page - Renesas Technology Corp