TMP86CS49UG datasheet(247/252 Pages) TOSHIBA

No. de pieza	TMP86CS49UG

Descripción Electrónicos	8 Bit Microcontroller

PDF	252 Pages

Scroll/Zoom	100%

Fabricante Electrónico	TOSHIBA [Toshiba Semiconductor]

Página de inicio	http://www.semicon.toshiba.co.jp/eng

Logo

247 / 252 page

Page 233

TMP86CS49UG

20.6 Recommended Oscillating Conditions

Note 1: A quartz resonator can be used for high-frequency oscillation only when VDD is 2.7 V or above. If VDD is below 2.7 V, use

a ceramic resonator.

Note 2: To ensure stable oscillation, the resonator position, load capacitance, etc. must be appropriate. Because these factors are

greatly affected by board patterns, please be sure to evaluate operation on the board on which the device will actually be

mounted.

Note 3: When using the device (oscillator) in places exposed to high electric fields such as cathode-ray tubes, we recommend

electrically shielding the package in order to maintain normal operating condition.

Note 4: The product numbers and specifications of the resonators by Murata Manufacturing Co., Ltd. are subject to change. For

up-to-date information, please refer to the following URL:

http://www.murata.co.jp/

XTIN

XTOUT

(2) Low-frequency Oscillation

XIN

XOUT

(1) High-frequency Oscillation

TMP86CS49UG Datasheet(PDF) 247 Page - Toshiba Semiconductor