| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
TMPR4937 Datasheet(PDF) 264 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMPR4937 Datasheet(HTML) 264 Page - Toshiba Semiconductor |
|
264 / 552 page ![]() Chapter 10 PCI Controller 10-6 10.3.3 Supported PCI Bus Commands Table 10.3.1 shows the PCI Bus commands that the PCI Controller supports. Table 10.3.1 Supported PCI Bus Commands C/BE Value PCI Command As Initiator As Target 0000 Interrupt Acknowledge † ⎯ 0001 Special Cycle † ⎯ 0010 I/O Read √ √ 0011 I/O Write √ √ 0100 (Reserved) ⎯ ⎯ 0101 (Reserved) ⎯ ⎯ 0110 Memory Read √ √ 0111 Memory Write √ √ 1000 (Reserved) ⎯ ⎯ 1001 (Reserved) ⎯ ⎯ 1010 Configuration Read † ‡ 1011 Configuration Write † ‡ 1100 Memory Read Multiple √ √ 1101 Dual Address Cycle √ √ 1110 Memory Read Line √ √ 1111 Memory Write and Invalidate √ √ Note: The byte enable signals are asserted as necessary during memory read and memory write cycles using I/O Read, I/O Write and Single Access commands. During burst memory reads, four byte enable signals are asserted. Key: √ : Supported when in both the Host mode and the Satellite mode † : Supported only when in the Host mode ‡ : Supported only when in the Satellite mode — : Not supported • I/O Read, I/O Write, Memory Read, Memory Write This command executes Read/Write access to the address mapped on the G-Bus and PCI Bus. • Memory Read Multiple, Memory Read Line The Memory Read Multiple command is issued if all of the following conditions are met when the Initiator function is operating and Burst Read access is issued from the G-Bus to the PCI Bus. (1) A value other than “0” is set to the Cache Line Size Field (PCICFG1.CLS) of the PCI Configuration 1 Register. (2) The Read data word count is equal to or less than the value set in the Cache Line Size Field. Also, the Read Memory Line command is issued when all of the following conditions are met. (1) A value other than “0” is set to the Cache Line Size Field (PCICFG1.CLS) of the PCI Configuration 1 Register. (2) The Read data word count is equal to or less than the value set in the Cache Line Size Field. |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |