MPC8540 datasheet(101/104 Pages) FREESCALE

101 / 104 page

MPC8540 Integrated Processor Hardware Specifications, Rev. 4

Freescale Semiconductor

101

Device Nomenclature

19 Device Nomenclature

Ordering information for the parts fully covered by this specification document is provided in

Section 19.1, “Nomenclature of Parts Fully Addressed by this Document.”

19.1 Nomenclature of Parts Fully Addressed by this Document

Table 62 provides the Freescale part numbering nomenclature for the MPC8540. Note that the individual

part numbers correspond to a maximum processor core frequency. For available frequencies, contact your

local Freescale sales office. In addition to the processor frequency, the part numbering scheme also

includes an application modifier which may specify special application conditions. Each part number also

contains a revision code which refers to the die mask revision number.

Table 62. Part Numbering Nomenclature

MPC

nnnn

ff(f)

Product

Code

Part

Identifier

Temperature

Range1

Package 2

Processor

Frequency 3, 4

Platform

Frequency

Revision Level

MPC

8540

Blank = 0 to 105

°C

C = –40 to 105

°C

PX = FC-PBGA

VT = FC-PBGA

(Pb-free)

833 = 833 MHz

667 = 667 MHz

L = 333 MHz

J = 266 MHz

B = Rev. 2.0

(SVR = 0x80300020)

C = Rev. 2.1

(SVR = 0x80300021)

MPC

8540

Blank = 0 to 105

°C

C = –40 to 105

°C

PX = FC-PBGA

VT = FC-PBGA

(Pb-free)

AQ = 1.0 GHz

F = 333 MHz

B = Rev. 2.0

(SVR = 0x80300020)

C = Rev. 2.1

(SVR = 0x80300021)

Notes:

1.For Temperature Range=C, Processor Frequency is limited to 667 MHz.

2.See Section 14, “Package and Pin Listings,” for more information on available package types.

3.Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this

specification support all core frequencies. The core must be clocked at a minimum frequency of 400MHz. A device must

not be used beyond the core frequency or platform frequency indicated on the device.

4.Designers should use the maximum power value corresponding to the core and platform frequency grades indicated on the

device. A lower maximum power value should not be assumed for design purposes even when running at a lower

frequency.

MPC8540 Datasheet(PDF) 101 Page - Freescale Semiconductor, Inc

MPC8540 Datasheet(HTML) 101 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Descarga

Enlace URL