STM8S datasheet(213/467 Pages) STMICROELECTRONICS

No. de pieza	STM8S

Descripción Electrónicos	STM8S Series and STM8AF Series 8-bit microcontrollers

PDF	467 Pages

Scroll/Zoom	100%

Fabricante Electrónico	STMICROELECTRONICS [STMicroelectronics]

Página de inicio	http://www.st.com

Logo

213 / 467 page

DocID14587 Rev 14

213/467

RM0016

16-bit advanced control timer (TIM1)

261

17.7.26

Capture/compare register 3 high (TIM1_CCR3H)

Address offset: 0x19

Reset value: 0x00

17.7.27

Capture/compare register 3 low (TIM1_CCR3L)

Address offset: 0x1A

Reset value: 0x00

654

3210

CCR3[15:8]

Bits 7:0 CCR3[15:8]: Capture/compare value (MSB)

If the CC3 channel is configured as output (CC3S bits in TIM1_CCMR3 register):

The value of CCR3 is loaded permanently into the actual capture/compare 3 register if the preload

feature is not enabled (OC3PE bit in TIM1_CCMR3). Otherwise, the preload value is copied in the

active capture/compare 3 register when a UEV occurs.The active capture/compare register contains

the value which is compared to the counter register, TIM1_CNT, and signalled on the OC3 output.

If the CC3 channel is configured as input (CC3S bits in TIM1_CCMR3 register):

The value of CCR3 is the counter value transferred by the last input capture 3 event (IC31).

654

3210

CCR3[7:0]

Bits 7:0 CCR3[7:0]: Capture/compare value (LSB)

STM8S Datasheet(PDF) 213 Page - STMicroelectronics